IR2086S HIGH SPEED 100V SELF OSCILLATING 50% DUTY CYCLE全新现货 深圳市亨力拓电子有限公司货源电话：0755-83293082 阮先生
IR2086S HIGH SPEED100V SELF OSCILLATING 50% DUTY CYCLE大批量到货
Features
? Simple primary side control solution to enable full-bridge
DC-Bus Converters for 48V distributed systems with reduced
component count and board space.
? Frequency and dead time set by two external components
? Maximum 500KHz per channel output with 50% duty cycle
? Adjustable dead time 50nsec ~ 200nsec
? Floating channel designed for bootstrap operation up to +100Vdc
? High and low side pulse width matching to +/- 25nsec
? Overcurrent protection with adjustable hICcup period.
? Undervoltage lockout and internal soft start
? Part also available leadfree
Description
The IR2086S(PbF) is a self oscillating full-bridge controller and driver IC
with 50% duty cycle ideally suited for 36V-75V full-bridge DC Bus
Converters.
Dead time can be controlLED through proper selection of CT and can range
from 50 to 200nsec. Internal soft start increases pulse width on power up
and maintains equal pulse widths for the high and low outputs throughout
the start up cycle. Undervoltage lockout prevents operation if Vcc is less than
7.5 Vdc. Over current shutdown occurs when the voltage on the Cs pin
exceeds 200mV. Restart after overcurrent trip can be delayed by adjusting
the external capacitor. The delay time ranges from 10μs to 1s.
