产品概述
The SN74LVC2G241DCUT is a dual Buffer/Line Driver designed for 1.65 to 5.5V VCC operation. This devICe is designed specifically to improve both the performance and density of 3-state memory-address drivers, clock drivers and bus-oriented receivers and transmitters. This device is organized as two 1-bit line drivers with separate output-enable (1OE, 2OE) inputs. When 1OE is low and 2OE is high, the device passes data from the A inputs to the Y outputs. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and OE should be tied to GND through a pull-down resistor and the minimum value of the resistor is determined by the current-sinking or the current-sourcing capability of the driver. This device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
IOFF Supports live insertion, partial-power-down mode and back-drive protection
Can be used as a down translator to translate inputs from 5.5V down to the VCC level
Latch-up performance exceeds 250mA per JESD 17
Inputs accept voltages to 5.5V
4.1ns at 3.3V Propagation delay (tpd)
10μA ICC Low power consumption
±24mA Output drive at 3.3 V
<0.8V at VCC = 3.3V, TA = 25°C VOLP (output ground bounce)
>2V at VCC = 3.3V, TA = 25°C VOHV (output VOH undershoot)
Green product and no Sb/Br
应用
工业, 信号处理, 音频, 成像, 视频和目视, 消费电子产品, 计算机和计算机周边, 射频通信, 通信与网络, 便携式器材, 电机驱动与控制
产品信息
逻辑器件类型: 缓冲/线路驱动器、非反相 逻辑系列/标号: 74LVC2G241 封装类型: VSSOP 针脚数: 8引脚 电源电压最小值: 1.65V 电源电压最大值: 5.5V 逻辑芯片系列: 74LVC 逻辑芯片标号: 742G241 工作温度最小值: -40°C 工作温度最高值: 85°C 产品范围: - 汽车质量标准: - MSL: MSL 1 -无限制